ZP - WHITE Airbrushing Primer/Micro Filler 120ml - 3023

ZP-3023

New product

By buying this product you can collect up to 1 loyalty point. Your cart will total 1 loyalty point that can be converted into a voucher of $0.20.


Pay in installments

Current plan: Lay-a-way Plan 25% down, 25% paid monthly

Description: To make things easier we are now allowing lay-a-way on your modeling purchases. A 25% deposit will be due to start. Then every 30 days an additional 25% will be due. Products will not be shipped until lay-a-way is paid in full. If you start a lay-a-way and don't pay it off in the time due, you loose your deposits.

Down payment: $3.24 (25.00%)

Number of payments: 4

Amount of payment: $2.43

Overpayment: $0.00

Total: $12.95

$12.95

Add to wishlist

You must be logged

More info

Airbrushing White Primer/Micro Filler 120ml supplied in Glass Bottle

  • Pre-Thinned for Airbrushing
  • Excellent Sealing Power
  • Good Filling Properties
  • Fast Drying
  • Easy to Sand

Application Guide
Stir for about 2 mins until the ball bearing rattles freely, ensuring contents is completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
To give a less absorbent and glossy finish the surface should be lightly polished with 1200/1500 wet and dry paper or micromesh.
For additional thinning and cleaning of equipment use Zero Cellulose Thinners
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C

Please Note :  A few customers have found when masking the model, and when removing the masking tape the primer peels off
To ensure this does not happen please read the following to ensure you correctly apply the product
he Issues are due to the Primer and Thinners in the jar Not being mixed correctly before applying to the model
If the primer content, which is thick and heavy sinks to the bottom on the jar, therefore if not stirred up fully, all you will be applying is basically Grey Thinners and NOT enough primer which should bite into the plastic and not peeling off
The Zero Primers do NOT have any ball bearing in the jars as 1 customer managed to shake it so hard they smashed the glass, so for safety reasons.
We order from Zero Paints around the beginning of each month. IF the color you want is listed as back ordered it will be ordered for the next shipment. We recommend you purchase it (if you can wait) to be sure we get enough of the color your interested in !

Reviews

No customer reviews for the moment.

Write a review

ZP - WHITE Airbrushing Primer/Micro Filler 120ml - 3023

ZP - WHITE Airbrushing Primer/Micro Filler 120ml - 3023

Customers who bought this product also bought:

30 other products in the same category: